The newest generation in Acker's drill rig line. Designed for multipurpose operations at economical drilling costs.
Mast:
Constructed of welded structural steel. Supports and guides the rotation and feed components. Positioned with two (2) hydraulic cylinders and rigidly held in the vertical position for drilling and is lowered to the travel position for moving from hole to hole and allows for 10' rod pulls. Mast mounting allows for angle drilling as well as 90° vertical. Also includes mast dump up to 60". Includes crown block with sheaves.
Drill Frame:
All welded steel construction and mounted on the slide base. Supports the power unit, mast, control panel, winches, and cathead.
Auger Guide:
Specify the size of augers.
Controls:
All controls are grouped together in a convenient Panel located at the left rear of the machine and facing the rear.
Mounting:
The entire drill is mounted on a structural steel frame and propelled by Caterpillar rubber crawler tracks with independent reversible 2-speed hydraulic motor drives. The track drive is operated with a radio remote control system with a wired back-up control. Ground bearing pressure, 100% gradability, and has 13" of ground clearance.
Cathead Cargo Type Hoist:
Hydraulically Powered cargo type hoist.
Main Drum:
Hydraulically Powered, 6,000 lb. planetary type with 75' of 3/8" cable, 8,000 lbs.
Quick Disconnect Adapter:
Option A: U-Joint type for augers, 1 5/8" hex or 2" hex.
Option B: Rigid type for rod/casing (specify size)
2" Swivel:
For air, mud, or water. Attaches directly to the top of the spindle.
Hand Chuck:
Three (3) jaw quick-disconnect hand chuck with one (1) set of jaws. Mounts on the drill spindle.
Ackermatic Hydraulic Chuck Assembly:
5" size handles all rod and casing up to "P" wireline and "H" casing. Assembly includes one set of five double row carbide inserts jaws when purchased with the complete package. (Jaws must be changed for each size drill rod or casing.)
Water Pump(s):
Option A: Moyno Type 3L6 or equal 27 GPM ©225 PSI
Option B: FMC (John Bean) L0918 (420) 20 GPM up to 700 PSI
Option C: FMC (John Bean) E0413C Foam Pump 14 GPM up to 600 PSI
2,500 Lb. Auxiliary Winch:
Supplied with 75 feet of 5/16" cable.
Wireline Hoist:
Hydraulically powered. Supplied with 1,000 feet of 3/16" cable. Lifting capacity is 800 lbs.
Automatic Hammer:
Hydraulically operated "SPT" 140-pound automatic hammer. (Meets ASTM-D-1586-99 requirements)
Hydraulic Leveling Jacks:
Two front and two rear-mounted hydraulic leveling jacks with 36" stroke and lock check valves.
Tool Box(s):
Provides approximately 7.0 cubic feet of lockable storage.
Rod Clamp Assembly:
Two opposing hydraulic cylinders facilitate rod and casing up to 4-1/2" diameter.
Breakout Wrench:
Hydraulically operated cylinder mounted to a wrench provides 1 "-6" diameter capacity to break drill rod.
Front Winch:
Hydraulically driven, front-mounted winch. (20,000 Ib. capacity) Capable of operating in conjunction with tracks.
Water Tank:
All welded construction with drain valve, baffles, and filler. Capacity 160 gallons. (Stainless Steel is also available)
Rod Storage:
Side-mounted as space allows for 10' lengths of rod and casing.
Test Boring Services, Inc.
181 Beagle Club Road, Washington, PA 15301
Copyright © 2020, Test Boring Services, Inc. All Rights Reserved.
Powered by GoDaddy