Enough Basic Geo-tech Power in a Compact Size. Ideal for Limited access locations.
Deutz three (3) cylinder, air-cooled Diesel Powered Unit, 47 HP @ 2,300 RPM, cold starting system with 12-volt electric start.
Double acting chain drive mechanism connected to a hydraulic cylinder with 72" stroke and capable of 11,000 lbs. upward thrust and 11,000 lbs. pull down. Feed speeds are 0-72 FPM up and down.
Taken from prime mover through a variable volume over-center piston pump and tandem fixed volume pump.
Four (4) speed hydraulic with 3-5/8" open spindle, RPM is infinitely controlled in each gear range. Speeds are as follows:
1st gear: 0-120 RPM @ 3,028 ft/lbs. torque
2nd gear: 0-252 RPM @ 1,452 ft/lbs. torque
3rd gear: 0-464 RPM @ 788 ft/lbs. torque
4th gear: 0-600 RPM @ 458 ft/lbs. torque
Welded structural steel construction; supports and guides the rotation and feed components. Positioned with two (2) hydraulic cylinders and rigidly held in the vertical position for drilling and is lowered to the travel position for moving from hole to hole. Mast mounting allows for angle drilling as well as 90 degrees vertical. Mast is capable of drilling under 8' ceilings.
All welded steel construction and mounted on the slide base. Supports the mast, control panel, and cathead.
Will accommodate 3-1/4" ID to 6-1/4" ID HSA Augers.
Hinowa Mini, 6" width, 13" height
Range between 5,000 - 5,500 lbs.
Via standard pick-up truck.
Cathead Cargo Type Hoist:
Hydraulically powered cargo type hoist.
Main drum (Hydraulically powered):
4,500 lb. planetary type with 75' of 5/16 cable.
Quick Disconnect Adapter:
U-joint type for augers, 1-5/8" hex.
Hydrostatically driven with infinitely variable control from the operator's station. Moyno type 3L4 or equal. 17.5 GPM @ 225 PSI.
Hydraulically powered used for wireline core drilling. 1,000' of 1/8" wireline cable. Lifting capacity is 800 lbs.
Included for Environmental Soil Probe Projects and Monitoring Well Installation.